Pre-launch preview · Check your logo before you order Free tool. No signup.
Pre-launch preview. Orders are not open yet. You can already check your artwork and save a 304 steel configuration in the studio.
Food-contact stainless · Cut for ice

304 Stainless Steel Cocktail Ice Stamp

US$1042-INCH · 304 STAINLESS

Bright, brushed, and built for the dish pit.

Your logo or monogram, deep-relief CNC cut into a 304 stainless steel face. No brass patina to manage and a finish that stays bright through constant commercial washdown, with the same artwork check and proof as our brass stamp.

  • 304 (18/8) austenitic stainless contact face, grade confirmed by mill certificate.
  • Deep CNC relief, target ≥ 2.8 mm, confirmed in your proof.
  • Expect about 4–5 seconds of contact on tempered clear ice.
  • M8 thread: add a second custom head to the same handle for $49.

01 Find your size

Face diameter

Prices include the +$15 304 steel face. Measure the flat top of your ice, not just the mold size.

02 Finish in hand

Handle

The all-steel option suits bars with strict washdown routines; walnut should not be soaked.

03 Add a second mark

Optional · M8 thread

Unscrews from the same handle on an M8 thread. Upload the second artwork in the Studio.

Your configuration · USD$104.00
2-inch (50.8 mm) · 304 stainless steel · Walnut handle
Start My 304 Steel Stamp — US$104 Check My Logo First

Your proof comes before machining. Shipping and any applicable taxes are shown before checkout. In this preview, the studio prepares your artwork check and configuration. No order is submitted and no payment is taken.

See your estimated dispatch date before checkout. Production starts after proof approval.
Mill certificatePublished before orders open Checked at actual sizeLines and gaps flagged first Proof before machiningNothing is cut until you approve One-time purchaseNo account, no subscription
Quick specification

What you’re
actually getting.

Pricing matches the Studio exactly: the brass base price plus $15 for the 304 face, $18 for a solid steel handle and $49 for each extra head. Tolerances and measured relief depth are added here from production samples, not estimated in advance.

Relief depth and tolerances are measured on production samples before launch.
Contact face304 austenitic stainless steel (about 18% Cr / 8% Ni)
Sizes & prices1.5″ / 38.1 mm $84 · 2.0″ / 50.8 mm $104 (recommended) · 2.5″ / 63.5 mm $124
HandleTurned walnut (included) or solid 304 stainless (+$18)
Extra headSecond interchangeable custom head, M8 thread, +$49
EngravingDeep CNC relief, target ≥ 2.8 mm, confirmed in your proof
Typical contactAbout 4–5 seconds on tempered clear ice
Intended useBrief contact with plain water ice, before the drink is poured
ApprovalDigital proof approved before machining
Honest metallurgy

304 stainless or
lead-free brass?

Neither is “better”. They trade speed for washdown ease and warmth for brightness. Here is the trade-off, plainly.

This page

304 stainless steel

Finish
Bright brushed steel that stays bright. No brass patina.
Care
Commercial-bar washdown ease: wash, sanitize, dry, repeat.
On ice
Slower heat transfer: plan on about 4–5 seconds of melt dwell.
Price
$84 / $104 / $124 (brass + $15)
Specifying for a bar? See hospitality tiers
Fastest melt

Bismuth lead-free brass

Finish
Warm brass that develops an heirloom patina with use.
Care
Mild soap, rinse, dry. Avoid acidic cleaners on the face.
On ice
Faster heat transfer: about 2–3 seconds of melt dwell.
Price
$69 / $89 / $109
View the lead-free brass stamp
Typical starting melt dwell on tempered clear ice
Bismuth lead-free brass2–3 s
304 stainless steel4–5 s
Composition values are nominal published ranges; a specific stamp’s grade is confirmed by its own documentation.
Property304 stainless steelBismuth lead-free brass
Appearance over timeStays bright and brushedWarms to a patina
Thermal conductivityLower; slower meltHigher; faster melt
Starting contact timeAbout 4–5 sAbout 2–3 s
Lead as an alloying elementNoNo; kept to ~0.0022% Pb in our target spec
Acidic contactGenerally more resistant; check finishCopper-alloy limits apply
Best fitHigh-volume bars, strict washdownHome bars, gifts, guest-facing theatre
Use & care

A little longer on the ice,
a lot easier at close.

Start with a clean, room-temperature stamp and a tempered, flat-topped clear cube. Press straight down for about 4–5 seconds, then lift straight up. Steel rewards patience rather than pressure. Don’t heat it with a flame, and don’t leave it in the ice well between drinks.

After service, wash with mild detergent, rinse, sanitize with a method compatible with stainless steel and your local food-safety rules, and dry thoroughly. Follow the care instructions supplied with your stamp; if you chose walnut, don’t soak the handle.

Read the clear-impression guide.

Questions

Steel,
explained.

It is different. 304 stainless has a bright brushed finish, develops no brass patina and is easy to wash and sanitize in a commercial bar. Lead-free brass conducts heat faster, marking tempered ice in roughly 2–3 seconds versus about 4–5 seconds for steel, and ages to a warm patina. Choose steel for washdown and durability, brass for speed and warmth.

Start with about 4–5 seconds of straight-down contact using a clean, room-temperature stamp on tempered, flat-topped clear ice. Ice temperature, artwork area and surface water change the result, so practise on a spare cube first. Do not heat the stamp with a flame.

The 304 face adds $15 to the brass price: 1.5-inch $84, 2-inch $104 and 2.5-inch $124. A solid 304 stainless handle is +$18, and a second interchangeable custom head is +$49.

Follow the care instructions supplied with your stamp. Wash with mild detergent, rinse, sanitize with a method compatible with stainless steel and your local food-safety rules, and dry thoroughly. A walnut handle should not be soaked.

Lead is not an alloying element in 304 stainless steel. The grade is still confirmed by a mill certificate, and surface finish and residues matter. Documentation is published before orders open. For the wider picture, read Lead-Free Brass, C36000, and What to Ask Before You Buy.

Ready when you are

Your design,
in brushed steel.

Check the details, approve the proof, and make every pour your own.

Pre-launch preview: no order is submitted and no payment is taken.