Hospitality tiers from 2 sets · M8 interchangeable menu heads Price your program
For cocktail bars, hotels & restaurants / 003

Your house mark,
through every rush.

Custom cocktail ice stamps in lead-free brass or 304 stainless, specified for service rather than the shelf.

Put your crest on every stirred drink without slowing the pass. We cut your logo in deep CNC relief, check it at final size so it holds up on ice, and set each station up with one handle and as many interchangeable menu heads as your seasons need.

Price a multi-station program and cost per pour
Volume tiers from 2 sets M8 interchangeable heads Proof before machining
House crest · in serviceØ 2 in · 50.8 mm
Three cut-crystal rocks glasses of an old fashioned with orange peel on a walnut bar, each clear ice cube stamped with a VF crest, a brass and walnut stamp resting on a brass dish beside a bar spoon
Three pours, one signature.Studio image · pre-production
Two alloys, two jobs in service

Speed at the pass,
ease in the dish pit.

Choose per station. Brass moves heat fast for theatre at the bar top; 304 stainless shrugs off constant washdown. Same relief depth, same M8 thread, same proof.

Fastest melt

Lead-free bismuth brass

Why bars choose it
Rapid thermal conductivity: a room-temperature head marks tempered ice in roughly 2–3 seconds, so stamping keeps pace with a rush.
Finish
Warm brass that develops a patina with use. Wash, rinse and dry after service.
Best for
The bar top, the pass, guest-facing theatre and signature serves.
Price
Included in the set price.
Commercial washdown

304 stainless steel

Why bars choose it
Dish-pit speed: no brass patina to manage, quick to wash, sanitize and dry between shifts.
Finish
Bright brushed steel. Conducts heat more slowly, so allow about 4–5 seconds of contact.
Best for
High-volume programs, hotel banqueting and multi-site groups with strict washdown routines.
Price
+$15 per head; solid 304 handle +$18 per set.
Typical starting contact time on tempered clear ice
Lead-free brass2–3 s
304 stainless4–5 s

Starting points with a clean, room-temperature head. Ice temperature, artwork area and surface water change the result; train on spare cubes before service.

Modular systemM8 brass thread
A turned walnut handle with a threaded M8 brass stud above two brass stamp heads on travertine: a round head deep-cut with an M monogram and a square head with a tapped centre hole
One handle per station. A head for every menu.Studio image · pre-production
Interchangeable heads · +$49 each

Change the menu,
not the tools.

Every head screws onto every handle on a standard M8 brass thread. Equip each station once, then add heads as the bar program evolves. Each one is cut to the same relief depth and checked at final size like the first.

  • 01House crest, all yearThe everyday mark on every stirred drink and spirit-forward serve.
  • 02Seasonal and menu headsA winter menu glyph, a summer terrace mark, an anniversary-of-opening date.
  • 03Private hire and activationsA head for a wedding party or corporate booking, or a guest brand’s mark used with their permission.
Bar & hospitality tier calculator

Price the program.
See the cost per pour.

Choose stations, alloy and extra menu heads. Tiers apply automatically: one set at list price, 2–4 sets at 10% off, 5 or more at 18% off. Copy the spec brief for your GM or procurement team.

01 Stations / handles

1–12 sets
3

Each set is one handle and one custom stamp head.

02 Face size

Per head

03 Contact-face alloy

Per head

04 Handle

Per set

05 Extra seasonal / menu heads

+$49 each · M8

Swap onto any handle. Extra heads are $49 flat in either alloy.

Hospitality estimate · USD
1 setListStandard
2–4 sets−10%Hospitality tier
5–12 sets−18%Program tier

Add 2 more sets to reach the 18% program tier.

Per set (2-inch, lead-free brass, walnut)
$89.00
Sets × 3
$267.00
Extra heads × 2
$98.00
Subtotal
$365.00
Hospitality tier (10%)
−$36.50
Estimated program total$328.50
3 sets · 2 extra heads · Hospitality tier
Cost per stamped pour ~$0.11

Across 3 handles × 1,000 stamped pours each (3,000 pours), paid once.

Check Our Crest in the Studio

Proposed pre-launch pricing. Volume tier, shipping, taxes and your estimated ship date are confirmed in writing before any order. No payment is taken on this page.

Service protocol

Built into the station,
not added to the ticket time.

A stamp only earns its place if it keeps pace. This is the routine we recommend training on before the first shift.

  1. 01

    Set the station.

    Clear ice in a tempering tray, the stamp on a dry room-temperature plate, a clean bar towel within reach. Never store the stamp in the ice well.

  2. 02

    Temper, press, lift.

    Let cubes sit 3–5 minutes until the frost turns glassy. Press straight down for about 2–3 seconds (brass) or 4–5 seconds (steel), then lift straight up.

  3. 03

    Wipe between rounds.

    Towel-dry the face every few cubes so meltwater doesn’t pool in the relief. Wash, sanitize and dry at close.

    Full clear-impression guide
For procurement & food-safety leads

The paperwork,
before the purchase order.

Hotel groups and multi-site operators need more than a nice photo. We publish the documents below before orders open, and every production batch is spectrometer-checked before dispatch.

We don’t describe the stamps as “FDA approved” or “Prop 65 certified”: those aren’t product certifications. See lead-free brass vs. C36000 for what to ask any supplier.

Hospitality documentation pack

Published before orders open
  • Contact-face alloy specificationBismuth lead-free brass or 304 stainless, with the exact grade.To publish
  • Batch spectrometer reportMethod, detection limit, date and the batch it applies to.To publish
  • Approved artwork proof (PDF)Archived per head, so reorders and new sites match exactly.Every order
  • Care & sanitizing sheetWashing, sanitizing compatibility and drying, per alloy.To publish

Need something specific for a tender or audit? Ask before ordering. We’ll tell you what exists today and what doesn’t yet.

Questions

Before the
first shift.

Lead-free bismuth brass conducts heat quickly, so it marks in roughly 2–3 seconds on tempered ice, which helps during a rush. 304 stainless steel has a bright brushed finish, no brass patina and is easy to wash and sanitize, but needs about 4–5 seconds. Many programs use brass at the bar top and steel where washdown speed matters most.

One set is list price. Two to four sets receive the 10% hospitality tier and five or more sets receive the 18% program tier, applied to sets and extra heads. Tiers, shipping and taxes are confirmed in writing before any order.

Yes. Every head uses the same M8 brass thread, so a new menu or event head screws onto any of your existing handles. Extra heads are $49 each and are checked and proofed like the first.

Follow the care instructions supplied with your stamp. Wash with mild detergent, rinse, sanitize with a method compatible with the material and your local food-safety rules, and dry thoroughly. Washing and sanitizing are different steps.

Before orders open we publish the contact-face alloy grade, a batch composition report with laboratory, method and detection limit, the basis of the lead-free claim, the testing scope for brief plain-ice contact, and care and sanitizing instructions. Ask before ordering and we will tell you what is available and what is not yet.

Start with the artwork

See your crest
before it meets the ice.

The Studio opens with a sample bar crest. Swap in your logo to see thin strokes and tight gaps flagged at final size, in brass or 304 steel.

Pre-launch preview: no order is submitted and no payment is taken.